CCF_100/InfiniTime
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove CMake targets and corresponding CLI arguments that are specific to the debugging environment (USE_JLINK, USE_OPENOCD and USE_GDB_CLIENT).

Browse Source
This commit is contained in:
Jean-François Milants
2022-09-17 21:17:01 +02:00
committed by JF
parent c853681d75
commit 6ed8e983e9
6 changed files with 2 additions and 189 deletions
Download Patch File Download Diff File Expand all files Collapse all files

51
cmake-nRF5x/CMake_nRF5x.cmake
View File

@@ -229,24 +229,6 @@ macro(nRF5x_setup)
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twi.c"
)
# adds target for erasing
if(USE_JLINK)
add_custom_target(FLASH_ERASE
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
COMMENT "erasing flashing"
)
elseif(USE_GDB_CLIENT)
add_custom_target(FLASH_ERASE
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
COMMENT "erasing flashing"
)
elseif(USE_OPENOCD)
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
COMMENT "erasing flashing"
)
endif()
if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin")
set(TERMINAL "open")
elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows")
@@ -255,16 +237,6 @@ macro(nRF5x_setup)
set(TERMINAL "gnome-terminal")
endif()
if(USE_JLINK)
add_custom_target(START_JLINK
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkGDBServer-${NRF_TARGET}"
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkExe-${NRF_TARGET}"
COMMAND sleep 2s
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkRTTClient"
COMMENT "started JLink commands"
)
endif()
endmacro(nRF5x_setup)
# adds a target for comiling and flashing an executable
@@ -282,29 +254,6 @@ macro(nRF5x_addExecutable EXECUTABLE_NAME SOURCE_FILES)
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_NAME}.out "${EXECUTABLE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_NAME}")
# custom target for flashing the board
if(USE_JLINK)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${NRFJPROG} --program ${EXECUTABLE_NAME}.hex -f ${NRF_TARGET} --sectorerase
COMMAND sleep 0.5s
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
elseif(USE_GDB_CLIENT)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_NAME}.hex
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
elseif(USE_OPENOCD)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_NAME}.hex\"" -c reset -c shutdown
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
endif()
endmacro()
# adds app-level scheduler library